BMDYR - DERUSTO RUST PREVENTATIVE ENAMEL WITH BUILT

  • MSDS: BMDYR
  • Manufacturer: DAP INC
  • Product Name: DERUSTO RUST PREVENTATIVE ENAMEL WITH BUILT
  • National Stock Number: 8010-00D001676
Product Identification

Product ID:DERUSTO RUST PREVENTATIVE ENAMEL WITH BUILT
MSDS Date:05/07/1990
FSC:8010
NIIN:00D001676
MSDS Number: BMDYR

Responsible Party
DAP INC
5300 HUBERVILLE RD
DAYTON, OH 45401-0277
US

Emergency Phone: 513-667-4461

Info Phone: 513-667-4461

Cage: 90300

Contractor
DAP INC.
277 DAYTON, OH 45401-0277 US

Telephone: 513-253-7154/800-543-3840

Cage: 90300

Ingredients

NAPHTHA, MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 30-50%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY IRRITATE EYES, SKIN, NOSE &
UPPER RESPIRATORY TRACT. HARMFUL IF INHALED. HARMFUL OR FATAL IF
SWALLOWED. CHRONIC: REPORTS HAVE ASSOCIATED PROLONGED & REPEATED
OCCUPATIONAL OVEREXPOSURE TO SO LVENTS WITH PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:IF INGESTED CAUSES VOMITING, DIARRHEA AND
DEPRESSED RESPIRATION. INHALATION MAY EFFECT THE BRAIN OR NERVOUS
SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15 MIN. CONTACT A
PHYSICIAN IMMEDIATELY. SKIN: WASH IMMEDIATELY WITH SOAP AND WATER.
INHALATION: REMOVE TO FRESH AIR. CONTACT A PHYSICIAN IMMEDIATELY.
INGES TION: DO NOT INDUCE VOMITING. CONTACT APHYSICIAN OR REGIONAL
POISION CONTROL CENTER IMMEDIATELY.

Fire Fighting

Flash Point Method:CC
Flash Point:105F,41C
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT, INCLUDING SELF
CONTAINED BREATHING APPARATUS IS RECOMMENDED TO PROTECT FROM
COMBUSTION PRODUCTS. COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE IF EXPOSED TO
EXTREME HEAT. ELIMINATE SOURCE OF IGNITION: HEAT, ELECTRICAL
EQUIPMENT, SPARKS & OPEN FLAMES. DO NOT PUT NEAR OXIDIZERS.

Accidental Release

Spill Release Procedures:VACUUM UP AND REUSE EXCESS LIQUID. ABSORB
REMAINING LIQUID WITH ABSORBENT MATERIAL AND PLACE INTO CONTAINERS.

Handling

Handling and Storage Precautions:STORE AWAY FROM CAUSTICS AND
OXIDIZERS. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. DO NOT
STORE AT TEMPERATURES ABOVE 120F OR EXCESSIVE FREEZING.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING VAPORS MAY BE HARMFUL OR FATAL.

Exposure Controls

Respiratory Protection:IF 8-HOUR EXPOSURE LIMIT OR VALUE IS EXCEEDED
FOR ANY COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR. CONSULT
YOUR SAFETY EQUIPMENT SUPPLIER AND THE OSHA REGULATION, 29 CFR
1910.134 FOR REQUIREMENTS .
Ventilation:PROVIDE SUFFICIENT MECHANICAL VENTILATION (LOCAL OR GENERAL
EXHAUST) TO MAINTAIN EXPOSURE BELOW PEL AND TLV.
Protective Gloves:SOLVENT IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES - CHEMICAL SPLASH GOGGLES
Other Protective Equipment:PROVIDE EYEWASH AND SOLVENT IMPERVIOUS APRON
IF BODY CONTACT WITH PRODUCT OCCURS. BARRIER CREAMS MAY BE USED.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
VAPORS ARE HEAVIER THAN AIR ANS WILL COLLECT IN LOW AREAS. CHECK ALL
LOW AREAS (BASEMENTS, SUMPS, ETC.) FOR VAPOR BEFORE ENTERING. KEEP
OUT OF REACH OF CHILDREN.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:310F,154C
Vapor Pres:2 MMHG
Vapor Density:5.0
Spec Gravity:0.9-1.1
Evaporation Rate & Reference:0.06 (TOLUENE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE LIQUID, VARIOUS COLORS; GASOLINE-LIKE ODOR.
Percent Volatiles by Volume:30-55

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS, I.E. CO*X,
NO*X.

Disposal

Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS. DISCARDED MATERIAL SHOULD BE INCINERATED AT A
PERMITTED FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.